Description
Description
- Dual motor controller – 2.8A 12V – with two EMG30 gear motors and encoders
- I2C or Serial Interface
- Two 100mm wheels with hubs already fitted
- Perfect for robot platforms from 5 to 10Kg
The Devantech RD02 – 12 Volt Robot Drive System is a complete Robot Drive system, ready to integrate into your robot, comprising of an MD25 motor drive module, two EMG30 gear motors with encoders, two mounting brackets, two 100mm wheels with hubs already fitted. Screws to fit the motors to the brackets and a hex key for the hub screw are included.
Only a single 12v battery capable of supplying peak current of 6Amps is required to power the system. Power for the logic comes from an on-board 5v regulator which is also capable of supplying up to 300mA to your own circuits.
Website
MD25 Documentation
EMG30 Specifications
Note: The documentation includes the read/write bit when it talks about I2C addresses. Some systems, such as Arduino, handle that bit separately, so the address that should be used is half the value specified in the documentation. For example, the default address is 0x58 when used with Arduino.
Rating & Review
There are no reviews yet.