Yellow AndyMark FRC 2017 Kit of Parts

$96.00

Description

AndyMark FRC 2017 Kit of Parts – Yellow
Includes air compressor and pneumatic components
Features NI RoboRIO for central processing
Offers Victor SPX speed controllers for motor control
Contains Logitech Gamepad F310 for operation
Provides battery tray and bumper kit for AM14U3 chassis

The AndyMark FRC 2017 Kit of Parts – Yellow is an essential collection for teams participating in the FIRST Robotics Competition. This kit is designed to closely replicate the Yellow Tote portion of the official Kit of Parts, with some modifications to include items available from AndyMark. It provides a comprehensive assortment of components necessary for building and operating a competitive robot.

The kit includes a variety of pneumatic components such as an air compressor, pressure relief valve, and a Nason pressure switch, which are crucial for managing the robot’s pneumatic systems. Additionally, it features a Norgren regulator and various pneumatic fittings, including straight, elbow, and union tee configurations, to ensure efficient air flow and control. The inclusion of a double solenoid valve and a pneumatic cylinder further enhances the robot’s pneumatic capabilities.

For electrical and control systems, the kit offers a NI RoboRIO, which serves as the central processing unit for the robot. It is complemented by a power distribution panel, voltage regulator module, and a pneumatic control module, all from the 2015 series, to ensure stable power management and control. The Victor SPX speed controllers included in the kit provide precise motor control, while the Logitech Gamepad F310 offers a reliable interface for human operators.

The kit also contains essential wiring components such as PWM extension cables, a CAN cable, and a battery charger, ensuring that the robot’s electrical systems are well-connected and powered. The inclusion of a battery tray kit and a red and blue bumper kit for the 2017 AM14U3 chassis provides structural support and protection for the robot during competition.

Note: Ensure all pneumatic components are properly installed and tested to prevent any risk of malfunction or injury.

1x AndyMark FRC 2017 Kit of Parts – Yellow
4x 3-wire PWM extension cable, 24″, 22 GA wire, universal servo connector on each end: 1 male, 1 female
1x Pressure Relief Valve
1x Air Compressor, 12VDC, 0.88 cfm, Viair 00090
1x Nason Pressure Switch
2x Bracket for plastic pneumatic tanks
6x Pneumatic Fitting, Straight, 1/4″ Tube Press-in, 1/8″ NPT male
3x Pneumatic Fitting, Union Tee, 1/4″ Tube Press-in
1x Norgren Regulator and Bracket
1x Ball Valve with 1/4″ Push-to-connect fittings
1x 1/8″ NPT Hex Head Plug
1x Cylinder, Air, SMC, 3/4″ bore, 7″ stroke, NCME075-0700
4x Pneumatic Fitting, Elbow, 1/4″ Tube Press-in, 1/8″ NPT male
1x Low Density PTFE Tape Roll, 1/2″ x 520″
2x Logitech Gamepad F310
1x Cable, 2-wire, 24 inch
1x 20 meters of Pneumatic Tubing, 1/4″ OD, Polyurethane, Black
4x Pneumatic Fitting, Straight Y, 1/4″ Tube Press-in
1x 1/4″ NPT Hex Head Plug
2x 3-wire PWM Y-cable, 8 inch
1x Valve, pneumatic, double solenoid, CKD 4GA120-M5-E01-4
1x Pneumatic Fitting, Adapter, 1/8″ NPT Male, 1/4″ NPT Female
1x Battery Charger, 1 Bank, 6 Amp, Dual Pro RS1 with SB-50A Connectors
1x Air Tank, 574 ml, Plastic, Black with Integrated Push Connect Fittings, Clippard
4x Victor SPX Speed Controller
1x Power Distribution Panel – 2015
1x Voltage Regulator Module – 2015
1x Pneumatic Control Module – 2015
1x Battery Tray Kit for AM14U3
3x Fitting, Male, Nylon, Hex Nipple, 1/8″ NPT
1x NI RoboRIO
1x CAN Cable, 10ft
2x Pressure Gauge, 1/8″ NPT, 0-160 PSI
1x Red and Blue Bumper Kit for 2017 AM14U3

PDF File

AndyMark FRC 2017 Kit of Parts – Yellow – Yellow Tote Checklist

3-wire PWM extension cable, 24″, 22 GA wire, universal servo connector
Pressure relief valve
Air compressor, 12VDC, 0.88 cfm
Nason pressure switch
Bracket for plastic pneumatic tanks
Pneumatic fitting, straight, 1/4″ tube press-in, 1/8″ NPT male
Pneumatic fitting, union tee, 1/4″ tube press-in
Norgren regulator and bracket
Ball valve with 1/4″ push-to-connect fittings
1/8″ NPT hex head plug
Cylinder, air, SMC, 3/4″ bore, 7″ stroke
Pneumatic fitting, elbow, 1/4″ tube press-in, 1/8″ NPT male
Low density PTFE tape roll, 1/2″ x 520″
Logitech Gamepad F310
Cable, 2-wire, 24 inch
Pneumatic tubing, 1/4″ OD, polyurethane, black
Pneumatic fitting, straight Y, 1/4″ tube press-in
1/4″ NPT hex head plug
3-wire PWM Y-cable, 8 inch
Valve, pneumatic, double solenoid
Pneumatic fitting, adapter, 1/8″ NPT male, 1/4″ NPT female
Battery charger, 1 bank, 6 amp
Air tank, 574 ml, plastic, black with integrated push connect fittings
Victor SPX speed controller
Power distribution panel – 2015
Voltage regulator module – 2015
Pneumatic control module – 2015
Battery tray kit for AM14U3
Fitting, male, nylon, hex nipple, 1/8″ NPT
NI RoboRIO
CAN cable, 10ft
Pressure gauge, 1/8″ NPT, 0-160 PSI
Red and blue bumper kit for 2017 AM14U3

Subtotal	$100.36
Total	$100.36

Yellow AndyMark FRC 2017 Kit of Parts

Description

Description

Rating & Review

12-Pack Crescent CMB6WCDP 6-in-1 Multi-Functional Screwdriver

JACOBS 5/16-24 Mounted 0.190-Inch 5/16 Stainless Steel Chuck Model 32726 OBM

German-Made Dewalt DW5829 SDS Max Rotary Hammer with Dimensions 1-7/16 x 18 x 22-1/2″

German-Made Gedore 122012 American Pattern Chain Pipe Wrench for 2 to 12-Inch Pipes

Bosch 10″ x 60 Tooth Carbide Laminate Saw Blade – PS1060LAM

Yellow AndyMark FRC 2017 Kit of Parts

Description

Description

Rating & Review

Related products

12-Pack Crescent CMB6WCDP 6-in-1 Multi-Functional Screwdriver

JACOBS 5/16-24 Mounted 0.190-Inch 5/16 Stainless Steel Chuck Model 32726 OBM

German-Made Dewalt DW5829 SDS Max Rotary Hammer with Dimensions 1-7/16 x 18 x 22-1/2″

German-Made Gedore 122012 American Pattern Chain Pipe Wrench for 2 to 12-Inch Pipes

Bosch 10″ x 60 Tooth Carbide Laminate Saw Blade – PS1060LAM

Shopping Cart